JEWELRY EMBROIDERY KITS

Please find below beginners embroidery kits to make jewelry.

Beginner Kits: Spiral Flower Brooch  |  Whirligig Flower Brooch  |  Metal Thread Brooch

Metal Thread Pendant  |  Tools Required

Home Page!  |    View Shopping Cart

Metal Embroidery Threads  |  The History of Metal Thread Embroidery  |  Glossary of Metal Threads

Free On-going Critique and Free Correspondence with all kits!  |  Gallery of Customers Embroideries of my Kits

Click on images for enlargements

SPIRAL FLOWER BROOCH KIT

The spiral brooch measures 2 1/2 inch by 2 1/2 inch and makes a beautiful accessory for clothing and can be displayed in a 4 inch picture frame or on top of a padded box lid when not being worn.

This project takes about a day to make (5 - 8 hours depending on how fast you stitch) and is suitable for beginners. The embroidery is worked by couching down strands of metal threads which are cut to the required lengths.

The finished brooch can be painted with a clear non-yellowing varnish so it does not tarnish. The brooch is worked in warm gold (copper), black, dark purple and bright violet pearl purl lines with sections of black and violet wire check purl chips (beads).

If you would like to change any of the coloured lines on the brooch (pearl purl) or sections (wire check purl chips) that I have used on the brooch for any of the colours that I sell on the website just leave a comment in the comments box when you place your order. There will be an additional cost if you want to substitute gold, silver or copper as these threads are more expensive to manufacture.

With the kit of supplies there are instructions and diagrams for working the brooch and you will receive a PDF file via email which has over 60 colour work-in-progress pictures for each stage of working the brooch. There are also instructions on how to mount the embroidery in a frame so that you can quickly and easily take the brooch out to wear it or leave it as a framed piece of art. The picture below shows 4 pages of the 16 page PDF file.

This is a great value kit suitable for any level of stitcher. I am offering free correspondence and free on going critique for this kit, for more details go to - Free on going critique.

SIZE

Height: 2 1/2 inches (6 1/4 cm)     Width: 2 1/2 inches (6 1/4 cm) 

KIT CONTENTS

Instruction Booklet

PDF File with over 60 colour photographs for working the brooch - will be emailed

Organza Fabric and Black Felt for Backing

Two Embroidery Needles

Polyester Sewing Thread

A Selection of Coloured No. 2 Pearl Purls

Wire Check Purl Thread

Brooch Pin

KIT COST

Spiral Flower Brooch Kit and PDF File: $65.00 Canadian Dollars

Quantity: View Cart


You will require a 6 inch hoop or 7 inch stretcher bar frame to work the brooch in.

7 inch by 7 inch Stretcher Bar Frame and Thumb Tacks: $14.00 Canadian Dollars

Quantity: View Cart


CLICK HERE FOR OTHER OPTIONAL TOOLS REQUIRED TO WORK THE EMBROIDERY


View the   Shopping Cart for mailing costs.

Click on images for enlargements

WHIRLIGIG FLOWER BROOCH KIT

The whirligig brooch measures 2 1/2 inch by 2 1/2 inch and makes a beautiful accessory for clothing and can be displayed in a 4 inch picture frame or on top of a padded box lid when not being worn.

This project takes about a day to make (5 - 8 hours depending on how fast you stitch) and is suitable for beginners. The embroidery is worked by couching down strands of metal threads which are cut to the required lengths.

The finished brooch can be painted with a clear non-yellowing varnish so it does not tarnish. The brooch is worked in ivory, dark blue and vivid red pearl purl lines with sections of black and blue check purl chips (beads).

If you would like to change any of the coloured lines on the brooch (pearl purl) or sections (wire check purl chips) that I have used on the brooch for any of the colours that I sell on the website just leave a comment in the comments box when you place your order. There will be an additional cost if you want to substitute gold, silver or copper as these threads are more expensive to manufacture.

With the kit of supplies there are instructions and diagrams for working the brooch and you will receive a PDF file via email which has over 60 colour work-in-progress pictures for each stage of working the brooch. There are also instructions on how to mount the embroidery in a frame so that you can quickly and easily take the brooch out to wear it or leave it as a framed piece of art. The picture below shows 4 pages of the 16 page PDF file.

This is a great value kit suitable for any level of stitcher. I am offering free correspondence and free on going critique for this kit, for more details go to - Free on going critique.

SIZE

Height: 2 1/2 inches (6 1/4 cm)     Width: 2 1/2 inches (6 1/4 cm) 

KIT CONTENTS

Instruction Booklet

PDF File with over 60 colour photographs for working the brooch - will be emailed

Organza Fabric and Black Felt for Backing

Two Embroidery Needles

Polyester Sewing Thread

A Selection of Coloured No. 2 Pearl Purls

Wire Check Purl Thread

Brooch Pin

KIT COST

Whirligig Flower Brooch Kit and PDF File: $65.00 Canadian Dollars

Quantity: View Cart


You will require a 6 inch hoop or 7 inch stretcher bar frame to work the brooch in.

7 inch by 7 inch Stretcher Bar Frame and Thumb Tacks: $14.00 Canadian Dollars

Quantity: View Cart


CLICK HERE FOR OTHER OPTIONAL TOOLS REQUIRED TO WORK THE EMBROIDERY


View the   Shopping Cart for mailing costs.

Pendant Stitched by Linda Brenner

Click on Images for Enlargements

METAL THREAD BROOCH KIT

The brooch is a beginners metal thread technique. It takes about 8 hours to make.

The instructions are detailed with lots of diagrams to follow and is suitable for those who are new to goldwork embroidery.

Working the embroidery: The coloured lines you see on the brooch are a stiff wire wound in a coil (pearl purl). The pearl purl is stretched to different states of openness and couched down with the stitches hidden in the coils of the pearl purl.  In the spaces between the pearl purl lines, gold purl chips (flexible metal beads) are sewn down.

The kit comes with the option of making a brooch or a pendant, so if you like the red colours of the brooch but want to make a pendant instead you have that option. The kit comes with instructions on how to finish the brooch or pendant and a brooch pin, pendant bail and leather necklace. You will need to supply craft glue to finish off the brooch or pendant.

I am offering free correspondence and free on going critique for this kit, for more details go to - Free on going critique.

SIZE

Brooch Height: 1 3/4 inches (4 1/2 cm)     Width: 1 3/4 inches (4 1/2 cm)

Pendant Height: 2 inches (5 cm)     Width: 1 3/4 inches (4 1/2 cm)

KIT CONTENTS

Instruction Booklet

Organza Fabric and Black Felt for Backing

Two Embroidery Needles

Polyester Sewing Thread

A Selection of Coloured No. 2 Pearl Purls

Gold Bright Check Purl Thread

Brooch Pin, Pendant Bail and Leather Necklace

KIT COST

Metal Thread Brooch Kit: $38.00 Canadian Dollars

Quantity: View Cart


You will require a 6 inch hoop or 7 inch stretcher bar frame to work the brooch in.

7 inch by 7 inch Stretcher Bar Frame and Thumb Tacks: $14.00 Canadian Dollars

Quantity: View Cart


CLICK HERE FOR OTHER OPTIONAL TOOLS REQUIRED TO WORK THE EMBROIDERY


View the   Shopping Cart for mailing costs.

Click on Images for Enlargements

METAL THREAD PENDANT KIT

The pendant is a beginners metal thread technique. It takes about 8 hours to make.

The instructions are detailed with lots of diagrams to follow and is suitable for those who are new to goldwork embroidery.

Working the embroidery: The coloured lines you see on the pendant are a stiff wire wound in a coil (pearl purl). The pearl purl is stretched to different states of openness and couched down with the stitches hidden in the coils of the pearl purl.  In the spaces between the pearl purl lines, copper and silver purl chips (flexible metal beads) are sewn down.

The kit comes with the option of making a pendant or a brooch, so if you like the green and brown colours of the brooch but want to make a brooch instead you have that option. The kit comes with instructions on how to finish the pendant or brooch and a pendant bail, leather necklace and a brooch pin. You will need to supply craft glue to finish off the pendant or brooch.

I am offering free correspondence and free on going critique for this kit, for more details go to - Free on going critique.

SIZE

Pendant Height: 2 inches (5 cm)     Width: 1 3/4 inches (4 1/2 cm)

Brooch Height: 1 3/4 inches (4 1/2 cm)     Width: 1 3/4 inches (4 1/2 cm)

KIT CONTENTS

Instruction Booklet

Organza Fabric and Black Felt for Backing

Two Embroidery Needles

Polyester Sewing Thread

A Selection of Coloured No. 2 Pearl Purls

Gold Bright Check Purl Thread

Brooch Pin, Pendant Bail and Leather Necklace

KIT COST

Metal Thread Pendant Kit: $38.00 Canadian Dollars

Quantity: View Cart


You will require a 6 inch hoop or 6 inch stretcher bar frame to work the pendant in.

6 inch by 6 inch Stretcher Bar Frame and Thumb Tacks: $14.00 Canadian Dollars

Quantity: View Cart


CLICK HERE FOR OTHER OPTIONAL TOOLS REQUIRED TO WORK THE EMBROIDERY


View the   Shopping Cart for mailing costs.

Stainless Steel Tweezers

Goldwork Pad

100% Pure Yellow Beeswax Rose (6 Grams): 1 ¼ inches wide and ½ inch thick

Goldwork/Snipping Scissors

Stainless Steel Mellor

Click on images for enlargements

 

OPTIONAL TOOLS

Stainless Steel Tweezers with Precision Tips - Essential tool for bending and positioning metal threads: $5.00 Canadian Dollars

Quantity: View Cart


Goldwork Pad - for cutting metal threads on: $3.50 Canadian Dollars

Quantity: Colour: View Cart


The beeswax is used for strengthening the sewing thread and waxing crochet cotton for padding some of the goldwork designs.  The small rose is ideal for one or two projects. For other sizes and types of beeswax click Here!

100% Pure Yellow Beeswax Small Rose -1 inches wide and inch thick: $1.50 Canadian Dollars

Quantity: View Cart


Scissors: $10.00 Canadian Dollars

Quantity: Colour: View Cart


Mellor: $25.95 Canadian Dollars

Quantity: View Cart


You will require a stretcher bar frame to work the embroidery in. Stretcher bar frames are inexpensive wooden embroidery frames in which you can get your fabric really tight. Click here for more details about a Stretcher Bar Frame.


6 inch by 6 inch Stretcher Bar Frame and Thumb Tacks: $14.00 Canadian Dollars

Quantity: View Cart


View the   Shopping Cart for mailing costs.

 

Hand Embroidery Kits

2-Sided Embroidery   •   Applique   •   Assisi   •   Beginners Kits   •   Blackwork   •   Blackwork with Goldwork   •   Carrickmacross Lace   •   Counted Thread   •   Crewel Embroidery   •   Cross-stitch Meets Blackwork   •   Etui Box Kits   •   Featured Designer   •   Free Embroidery Designs   •   Fine White Work   •   Goldwork   •   Hapsburg Lace   •   Jewelry   •   Kit of the Month   •   Modern Jacobean   •   Mountmellick   •   Needle Painting   •   Projects for Groups   •   Pulled Work   •   RSN Gold   •   Schwalm   •   Surface Embroidery   •   Shadow Work   •   Traditional Jacobean   •   What is Hand Embroidery?   •   Whats New?   •   White Work   •   Wholesale

Embroidery Merchandise

Acid Free Products   •   Blackwork  Supplies   •   Books   •   Carrickmacross Lace Supplies   •   Embroidery Accessories   •   Fabrics   •   Frames   •   Gift Certificates   •   Gift Ideas   •   Goldwork Supplies   •   Kid  Leather   •   Magnifiers   •   Metal Threads   •   Merchandise   •   Mountmellick Supplies   •   Needles   •   Needle Painting Supplies   •   Needlework Boxes   •   Organizers   •   Scissors   •   Threads   •   Tools and Supplies   •   Tools For Design Transfer   •   Whats New?

Services

Classes   •   Commissions   •   Contact Me   •   Credentials   •   Currency Convertor   •   Discount Opportunities   •   Email Me   •   Embroidery Tips   •   Free On-going Critique   •   Free Designs   •   Frequently Asked Questions   •   Gallery of Customers Embroideries   •   Gallery of Tanja's Embroideries   •   Gift Certificates   •   Help!   •   Home Page!   •   Links   •   Mailing List   •   Mail Order   •   Metal Thread Glossary   •   Newsletter   •   On-line Classes   •   Personal History   •   Private Classes   •   Publications   •   Purchase Details   •   Sale Items   •   Site Map   •   Slide Show   •     Shopping Cart   •   Teaching Schedule   •   Tell a Friend   •   What is Hand Embroidery?   •   Whats New?   •   Work in Progress   •   Wholesale

Home Page!

I Accept:

Solution Graphics

Tanja Berlin © Berlin Embroidery Designs  

Address: 1481 Hunterbrook Road NW, Calgary, Alberta T2K 4V4, Canada Telephone: (403) 274 6293  Email: tanja@berlinembroidery.com