Fine White Work Song Bird Kit
Fine White Work Song Bird Kit
$44.38 USD
The Fine White Work Songbird is an advanced design.
The beautiful fine embroidery is created by stitching three layers of fabric (two layers of shadow linen with a layer of net sandwiched in-between) are sewn together with surface embroidery stitches. When all the embroidery has been worked layers of linen are cut away from the back or the front of the work.
This will leave some areas with two layers of fabric, some with one layer of fabric and some with just net creating a dimensional look to the embroidery. On the single layer of fabric pulled-work stitches are worked, in the net areas net stitches are worked.
Recommended Supplies
Hand Embroidery Scissors – Lace Scissors
The lace hand embroidery scissors are highly recommended for needlework techniques that require precision cutting such as Carrickmacross Lace, Fine White Work, Hardanger and Drawn Thread.
The lace scissors enables you to get close to the edge of the area to be cut without snipping the fabric with the point of the scissors by mistake.
Hand Embroidery Scissors – Lace Scissors
The lace hand embroidery scissors are highly recommended for needlework techniques that require precision cutting such as Carrickmacross Lace, Fine White Work, Hardanger and Drawn Thread.
The lace scissors enables you to get close to the edge of the area to be cut without snipping the fabric with the point of the scissors by mistake.
$19.33 USDAdd to cart
12 Inch Stretcher Bar Frame and Thumb Tacks
I recommend the stretcher bar frame to work my hand embroidery kit in because the frame is quick to assemble and the fabric stays taught in the frame. The frame comes with brass thumb tacks and a tack remover. The frame can be used over and over so if you purchase more than one of my kits you can use the same frame if it is the right size.
Please visit the following webpage for instructions on how to assemble a stretcher bar frame: Stretcher Bar Frames Information
12 Inch Stretcher Bar Frame and Thumb Tacks
I recommend the stretcher bar frame to work my hand embroidery kit in because the frame is quick to assemble and the fabric stays taught in the frame. The frame comes with brass thumb tacks and a tack remover. The frame can be used over and over so if you purchase more than one of my kits you can use the same frame if it is the right size.
Please visit the following webpage for instructions on how to assemble a stretcher bar frame: Stretcher Bar Frames Information
$13.31 USDAdd to cart
Needles – Size 10 or 12 Crewel Embroidery
The size 10 crewel embroidery needle is used in my surface embroidery kits such as: Carrickmacross Lace, Fine White Work, Goldwork, Modern Jacobean, Needle Painting and Shadow Work.
My kits come with two needles but you may want to purchase more of the needles as size 10 embroidery/crewel needles, in case you mislay your needle as the size 10 crewel embroidery needles can be hard to find in craft stores as they are smaller than regular sewing needles.
I also carry the size 12 crewel embroidery needles. I often use these for sewing down purl threads in goldwork or if I am working a very fine needle painting design.
Needles – Size 10 or 12 Crewel Embroidery
The size 10 crewel embroidery needle is used in my surface embroidery kits such as: Carrickmacross Lace, Fine White Work, Goldwork, Modern Jacobean, Needle Painting and Shadow Work.
My kits come with two needles but you may want to purchase more of the needles as size 10 embroidery/crewel needles, in case you mislay your needle as the size 10 crewel embroidery needles can be hard to find in craft stores as they are smaller than regular sewing needles.
I also carry the size 12 crewel embroidery needles. I often use these for sewing down purl threads in goldwork or if I am working a very fine needle painting design.
$2.82 USDSelect options
The Fine White Work Songbird is an advanced design.
The beautiful fine embroidery is created by stitching three layers of fabric (two layers of shadow linen with a layer of net sandwiched in-between) are sewn together with surface embroidery stitches. When all the embroidery has been worked layers of linen are cut away from the back or the front of the work.
This will leave some areas with two layers of fabric, some with one layer of fabric and some with just net creating a dimensional look to the embroidery. On the single layer of fabric pulled-work stitches are worked, in the net areas net stitches are worked.
The instruction booklet that comes in the kit has lots of diagrams and detailed instructions to guide you through the embroidery. The instructions are written with the beginner in mind and intended to guide embroiderers of any level through the embroidery from beginning to end. The fabric comes with the design hand drawn on so there are no worries about transferring the design.
The embroidery can be mounted on a coloured background which shows up the density of the fabric layers and the white embroidery threads.
I am offering free on-going critique with this kit…..you can email me at any time if you have questions or would like me to critique your embroidery.
Embroidery Size:
- 3 1/4 inches (8 1/4 cm) high by 5 1/2 inches (14 cm) wide
Kit Contents:
- Instruction Booklet
- Two Pieces of Shadow Linen Fabric 13 inches by 13 inches (32 1/2 cm by 32 1/2 cm), One Piece with the Design Hand Drawn on
- One Piece of White Honeycombe Net (Tulle) 13 inches by 13 inches (32 1/2 cm by 32 1/2 cm)
- Two Skeins of White DMC Embroidery Cotton
- One Spool of White Gutterman’s Fine Cotton Thread
- One Size 10 Crewel Embroidery Needle
- One Size 18 Chenille Needle
Recommended Supplies:
| Weight | 0.17 kg |
|---|---|
| Dimensions | 37 × 27 × 0.8 cm |
