Goldwork Embroidery Scissors
Goldwork Embroidery Scissors
$12.48 USD
The goldwork scissors have a finely serrated blade which is perfect for goldwork embroidery. The blade grips the metal thread without damaging it so that you get a nice clean. The blades of the scissors are fine and sharp for precision cutting.
The finger holes are large for embroidery scissors, so they are easy to pick up and hold into position when cutting the metal threads.
Recommended Supplies
Mellor
A mellor also known as a mellore or melor is a perfectly manufactured tool for metal thread embroidery.
The mellor is made out a soft smooth metal that is not abrasive.
The narrower end is used as a stiletto to widen a hole in the ground fabric to plunge a heavy twisted cord or metal thread to the back.
The round end is used to nudge and push metal threads into position and is gentler on the metal threads than using tweezers as the mellor has been polished and has smooth rounded edges so less likely to damage the metal thread.
Size: 2 7/8 inches (7 1/2 cm) long by 1/2 inch (1 1/4 cm) wide
Mellor
A mellor also known as a mellore or melor is a perfectly manufactured tool for metal thread embroidery.
The mellor is made out a soft smooth metal that is not abrasive.
The narrower end is used as a stiletto to widen a hole in the ground fabric to plunge a heavy twisted cord or metal thread to the back.
The round end is used to nudge and push metal threads into position and is gentler on the metal threads than using tweezers as the mellor has been polished and has smooth rounded edges so less likely to damage the metal thread.
Size: 2 7/8 inches (7 1/2 cm) long by 1/2 inch (1 1/4 cm) wide
$20.83 USDAdd to cart
Beeswax Small Rose
The 100% beeswax small rose is used to coat sewing thread when working metal thread/goldwork embroidery and is a perfect size to work two or three of my goldwork designs.
Small Rose Size: 1 ¼ inches wide and ½ inch thick
Beeswax Small Rose
The 100% beeswax small rose is used to coat sewing thread when working metal thread/goldwork embroidery and is a perfect size to work two or three of my goldwork designs.
Small Rose Size: 1 ¼ inches wide and ½ inch thick
$1.25 USDAdd to cart
Goldwork and Beading Pad
A goldwork and beading pad is a brilliant piece of vellux/velvet like fabric which you can use to place goldwork threads and beads on so they will stay in one place rather than skidding across a table surface.
Pad Size: 8 inch by 10 inch
Goldwork and Beading Pad
A goldwork and beading pad is a brilliant piece of vellux/velvet like fabric which you can use to place goldwork threads and beads on so they will stay in one place rather than skidding across a table surface.
Pad Size: 8 inch by 10 inch
$2.92 USDAdd to cart
Craft Organizer
The Large Yazzii Craft Organizer is my favourite case to store my needlework supplies.
I use this case at home and whenever I go traveling to teach or on holiday as it holds a lot of supplies but is soft and stuff-able for the suitcase.
The case has 8 zippered compartments with durable see through panels.
Size: 9 1/2 inches by 7 inches by 3 1/4 inches (24 cm by 17 cm by 8 cm)
Craft Organizer
The Large Yazzii Craft Organizer is my favourite case to store my needlework supplies.
I use this case at home and whenever I go traveling to teach or on holiday as it holds a lot of supplies but is soft and stuff-able for the suitcase.
The case has 8 zippered compartments with durable see through panels.
Size: 9 1/2 inches by 7 inches by 3 1/4 inches (24 cm by 17 cm by 8 cm)
$40.88 USDSelect options
Goldwork Honeysuckle Kit
The Goldwork Honeysuckle is a beginners design.
The honeysuckle can be worked in gold, silver or copper and stitched on a cotton velveteen fabric. Areas of the design are padded with felt and the metal embroidery threads sewn over top.
The fabric comes with the design hand painted on so you do not have to worry about transferring the design yourself and all the threads in the kit are clearly labelled.
Goldwork Honeysuckle Kit
The Goldwork Honeysuckle is a beginners design.
The honeysuckle can be worked in gold, silver or copper and stitched on a cotton velveteen fabric. Areas of the design are padded with felt and the metal embroidery threads sewn over top.
The fabric comes with the design hand painted on so you do not have to worry about transferring the design yourself and all the threads in the kit are clearly labelled.
$48.43 USDSelect options
Book Goldwork – Beginners Guide
This Beginners Guide to Goldwork book is a good reference book for goldwork techniques.
The techniques illustrated in the book are on how to prepare the fabric for goldwork and the techniques worked on the sampler that is featured on the front page of the book.
Book Goldwork – Beginners Guide
This Beginners Guide to Goldwork book is a good reference book for goldwork techniques.
The techniques illustrated in the book are on how to prepare the fabric for goldwork and the techniques worked on the sampler that is featured on the front page of the book.
$21.67 USDAdd to cart
Tweezers – Thorn Bird
These luxurious tweezers have padded thumb and finger grips and a fine bent tip to get into the most awkward positions.
They make great unpicking tools to grab those tiny threads your finger nails just can’t keep a hold of.
They are also an ideal tool for Goldwork embroidery to hold, position and to manipulate metal threads.
Tweezers Size
Length: 4 3/4 inches (12 cm) Width: 5/8 inch (1 1/2 cm)
Tweezers – Thorn Bird
These luxurious tweezers have padded thumb and finger grips and a fine bent tip to get into the most awkward positions.
They make great unpicking tools to grab those tiny threads your finger nails just can’t keep a hold of.
They are also an ideal tool for Goldwork embroidery to hold, position and to manipulate metal threads.
Tweezers Size
Length: 4 3/4 inches (12 cm) Width: 5/8 inch (1 1/2 cm)
$12.48 USDAdd to cart
The goldwork scissors have a finely serrated blade which is perfect for goldwork embroidery. The blade grips the metal thread without damaging it so that you get a nice clean. The blades of the scissors are fine and sharp for precision cutting.
The finger holes are large for embroidery scissors, so they are easy to pick up and hold into position when cutting the metal threads.
Scissors Size: Length: 3 5/8 inches (9 1/2 cm) Width at handles: 2 3/8 inches (5 1/2 cm) Width of finger/thumb holes: 7/8 inches (1 1/4 cm)
| Weight | 0.02 kg |
|---|---|
| Dimensions | 29 x 25 x 0.2 cm |
Other Things You Might Like
Goldwork and Beading Pad
A goldwork and beading pad is a brilliant piece of vellux/velvet like fabric which you can use to place goldwork threads and beads on so they will stay in one place rather than skidding across a table surface.
Pad Size: 8 inch by 10 inch
$2.92 USDAdd to cart
Tweezers – Thorn Bird
These luxurious tweezers have padded thumb and finger grips and a fine bent tip to get into the most awkward positions.
They make great unpicking tools to grab those tiny threads your finger nails just can’t keep a hold of.
They are also an ideal tool for Goldwork embroidery to hold, position and to manipulate metal threads.
Tweezers Size
Length: 4 3/4 inches (12 cm) Width: 5/8 inch (1 1/2 cm)
$12.48 USDAdd to cart
Needle Minder – Cranes
The cranes on navy needle minder is a place to park your extra needles when you are working on your project. The decorative side of the minder has a magnet on the back and goes on the front of the fabric, another magnet is placed at the back of the fabric holding the minder in place.
$12.07 USDAdd to cart
Magnetic Wand – Telescoping
This very handy telescoping magnetic wand can be used to pick up dropped needles and pins without leaving the comfort of your seat.
It is also great for locating lost needles and pins, just wave the wand around the floor and the strong magnet draws the lost needle to the end of the wand.
I have found it essential for the safety of my dogs, who can’t verbalize that they have stepped on a needle.
Length Fully Extended: 24 inches (60 cm), Length Retracted: 5 1/2 inches (13 3/4 cm)
$6.64 USDAdd to cart
Stretcher Bar Frames
Stretcher bars are inexpensive wooden embroidery frames in which the fabric can be pulled really tight. The end of the bars have teeth that you slot together to form a frame at any size that you require for your needlework. I recommend the stretcher bar frames to work my hand embroidery kits in because they are very quick to assemble and the fabric stays taught in the frame.
I highly recommend purchasing the brass thumb tacks which are stronger and sharper than office supplies thumb tacks or quilters thumb tacks.
Please visit the following webpage for instructions on how to assemble a stretcher bar frame and choosing the right size for your needlework: Stretcher Bar Frames Information
$4.18 – $15.87 USDSelect options
